[an error occurred while processing this directive]

Note: These are the case connector (Power LED, HDD LED, etc.) settings for several models of the Jabil Kadoka motherboards.
We cannot be held responsible for damage to your system due to our assistance, so use at your own risk! We have no affiliation with Gateway, and do not claim to be experts. We have simply posted these settings to help others that have had a problem getting this information.
Note: If you've used this diagram previously, please take note that we've changed the position of the reset switch, the suspend switch and the power switch. I don't believe the previous settings will damage your machine, but it's best to have it connected correctly. We apologize for any inconvenience this may have caused you.

NEW: The diagram below shows settings that should be correct for these boards.

In this diagram, the battery is to the left of the pin layout. You can tell the orientation by the absence of the second pin on the bottom row.
Note: Pin one is always designated by the colored wire (red, green, blue, etc.).

---

Back to the Jabil Kadoka Motherboard Info Page